Bronze Boat Fittings
Based on years spent building and restoring traditional-style wooden boats, we’ve devloped a range of fittings both practical and classic. These fittings are in keeping with the history of traditional fishing boats, and are extremely long-lasting.

Bulkhead Light
Bronze marine bulkhead light for the cabin of your boat or home. Includes frosted lens, diffused light, and LED globe in tungsten and a push button switch.
Diameter: 118mm
Lens: 89mm

Bronze Handle
A general purpose bronze cabinet handle typically used throughout our boat range, but also a popular item for use at home.

Coat Hook
Traditional screw mount bronze coat hook.





Cleat
This bronze deck cleat comes in five sizes. The large and x-large are to be used as a deck cleat in a marina context.

Square Hinge
Square bronze hinge to be typically used on a table (flush, 180 degree bend).
L.O.A: 79mm

Round Hinge
Round bronze Hinge to typically be used on a hatch (flush, 180 degree bend).
L.O.A: 129mm
Width: 37mm

Hasp & Staple
Traditionally designed bronze hasp and staple for use in your boat's cabin.
L.O.A: 102mm
Height: 27mm
Width: 34mm


Transom Hinge
Bronze hinge typically used for transom board, swim platform or scuttle doors. Generally two transom board hinges are needed per platform. *The hinges are not reversable, please select carefully.
Handrail Fitting [Middle]
Middle bronze fitting for a handrail, ideal for towel racks and tops of cabins on boats. Can be fitted with copper or timber tubing.
I.D: 32mm
Handrail Fitting [End]
End bronze fitting for a handrail, ideal for towel racks and tops of cabins on boats. Can be fitted with copper or timber tubing.
I.D: 32mm

Hatch Latch
Bronze Hatch Latch, holdown.
O.D: 79mm
Height: 82mm
Hatch Length: 91mm

Ring Pull [Hatch Pull]
Bronze ring pull to sit completly flush on deck or floorboards.
Upper O.D: 62mm
Lower O.D: 38mm
I.D: 37mm
Depth: 11mm

Drink Holder
Handmade bronze drink holder typically used on our boats.


Deck Plate
Bronze deck plate - can also be used as a drain bung, sits completly flush with deck.


Rowlocks
Bronze rowlocks for holding oars in place in small dinghys. Two sizes available, please select carefully. *Sold in pairs.
Small: 12mm
Large: 16mm


Rowlock Plates
Bronze rowlock plates suitable for a dinghy or a small sailing boat. Two sizes available, please select carefully. *Sold in pairs.
Small I.D: 12mm
Large I.D: 15mm


Flagstaff Socket Transom Mount
Angled socket for Flagstaff, comes in two sizes.
Small: 31mm
Large: 38mm

Registered Fishing Boat [RFB]
RFB for Couta Boat.

Lacco Scroll
The lacco scroll is permitted for use on known Lacco-built boats. The scroll is akin to a signature and SHOULD NOT be used on boats not known to be Lacco-built.
Width: 52mm
Height: 29mm

Bronze Cover Buttons
Sold individually.

Boat Hook
Bronze boat hook, end only (no handle).
*We also have available floating boat hooks with teak handles. ie. floats with handle facing upward when dropped overboard. [Size: 2m, 2.6m, 2.9m]
L.O.A: 225mm
OD: 45mm
I.D: 41mm - 30mm
Hook Length: 52mm





Eye Bolt
Bronze eye bolt, comes in five sizes, please choose carefully.




Belaying Pin
Belaying pin comes in four sizes.
X-Small LOA: 152mm
Small LOA: 203mm
Medium LOA: 254mm
Large: 370mm

Spiderband Belaying Pin
Suits spiderbands.
L.O.A: 145mm


Bobstay Band
Bobstay band, suits 88mm - 114mm stem. The bobstay band has an old type or a new type, please choose carefully.





Chain Plate [X-Small]
Bronze chain plate comes in five different sizes, please choose carefully.
X-Small: suits a dinghy
Small: suits 18’ boat
Medium: suits 20-22’ boat
Large: Suits 20-24’ boat
X-Large: suits 26’ couta boat

Chain Plate Bolt - Stock
A bronze rod for making chain plate bolts.
25mm - 304mm
=

Chain Plate Bolt
Head
diameter: 25mm
thickness: 5mm
Bolt
diameter: 12mm
length: 25mm


Thimble
Bronze thimble comes in two different sizes.
Small LOA: 65mm
Large LOA: 76mm

Sheave
Sheave - for a centreplate or bowsprit on a couta boat. Two different sizes, please choose carefully.
Small length: 76mm
Large length: 95mm

Block Sheave
Length: 72mm
Diameter: 20mm
Hole: 12mm



Gudgeon Pin
Standard size:
L.O.A: 170mm
Diameter: 19mm
Large:
L.O.A: 152mm
Diameter: 20mm
X-Large:
L.O.A: 152mm
Diameter: 25mm



Cat Whisker Plate
Small LOA: 145mm
Medium LOA: 190mm (suits couta boat)
Large LOA: 242mm (suits 26’ couta boat)

Pad Eye for Mainsheet Traveler Uphaul
Couta boat mainsheet traveller up-haul.
L.O.A: 117mm




Mast Cap
X-Small: dinghy mast cap
Top I.D: 38mm
Bottom O.D: 44mm
Small: jibboom
Top I.D: 69mm
Bottom O.D: 62mm
Medium: 4 lugs
Top I.D: 114mm
Bottom O.D: 133mm
Large: 6 lugs
Top I.D: 114mm
Bottom O.D: 113mm
X-Large: 26’ couta boat
Top I.D: 68mm
Bottom O.D: 102mm

Jibboom cap
Jibboom cap - tapered. For a 26’ couta boat.
Top I.D: 55mm
Bottom O.D: 67mm





Roller
Suits wooden bow chock.
Length: 76mm
Diameter: 82mm
Length: 47mm
Diameter: 63mm
Length: 63mm
Diameter: 63mm
Length: 57mm
Diameter: 44mm
Suits single deck track
Length: 19mm
Diameter: 38mm




Rudder Gudgeon
X-Small: for a dinghey
L.O.A: 133mm
Small LOA: 172mm
I.D: 34mm
Medium LOA: 280mm
I.D: 44mm
Large LOA: 370mm
I.D: 32mm


Rudder D-Bolt
Small: for a dinghey
L.O.A: 165mm
Diameter: 9mm
Large: for a couta boatL.O.A: 266mm
Diameter: 18mm

Tiller Arm
Two sizes.

Deck Track
Lengths of 1000mm per piece Measurements may vary slightly, as such tracks may need some machining for perfect headsail car fit.


Double Sheave Car Assembly
3 parts.
- Headsail car base
- Sheave headsail car
-Sheave pattern

Lower Rudder Base & Pintle
Lower O.D: 61mm
O.D: 21mm
Width: 89mm
Height: 88mm
L.O.A: 142mm

Gooseneck Fitting for Tabernacle Wide
Facilitates mast lowering with boom in position.
L.O.A: 95mm W.O.A: 200mm


Cutless Bearing Holder
Small: suits 25mm - 31mm shaft
Large: suits 38mm - 44mm shaft.

Stanchion
For wire fence around a boat. Can be made to order - price will vary.
L.O.A: 620mm




Jibboom Irons
X-Small: for a dinghy
I.D: 47mm
Small I.D: 95mm
Medium I.D: 101mm
Large I.D: 111mm

Spiderband
Four sizes available, includes belaying pins. X-Small: 101mm
Small: 114mm Medium: 127mm Large: 145mm

Stem Fitting
X-Small: for use with a 63mm stem
Small: for use with a 76mm stem
Medium: for use with a 95mm stem
Large: for use with a 101mm stem

Anchor Bow Sprit
Length: 540mm
I.D 65mm

Table Base
I.D: 60mm
O.D: 180mm
Height: 50mm


Folding Table
Woodenboat Shop designed folding table.
Small: suitable for a Nepean
1220mmx700mm
Large: suitable for a Cheviot or larger
1600mmx700mm
Caulking Tools
Caulking tools are a must have for any traditional shipwright or boat builder/repairer.

Caulking Cotton
Caulking Cotton roll is an 8 Strand, length approximately 360m.

Bronze Caulking Iron Set
The bronze caulking iron set includes our whole range of bronze caulking irons [CK-1, 2, 4, 5, 7, 8, 9, 10, 11] *includes canvas pouch.

Bronze Caulking Iron #1

Bronze Caulking Iron #2
Caulking Iron #2 is a bronze making iron with a sharp edge, 66mm long.

Bronze Caulking Iron #3
Caulking Iron #3 is a bronze crease iron with a single crease, 55mm long.

Bronze Caulking Iron #4
Caulking Iron #4 is a small bronze cleat with rounded ends, 65mm long.

Bronze Caulking Iron #7
Caulking Iron #7 is a bronze crease iron with a single crease 4mm edge, 42mm long.

Bronze Caulking Iron #8
Caulking Iron #8 is a bronze making iron with a sharp edge, 36mm long.

Bronze Caulking Iron #9
Caulking Iron #9 is a bronze bent crease iron with a single crease, 47mm long.

Bronze Caulking Iron #10
Caulking Iron #10 is a bronze bent crease iron with a single crease. Bent 4mm edge, 20mm long.

Bronze Caulking Iron #11
Caulking Iron #11 is a bronze single crease. 45° setting iron, 24mm long.
Fastenings
We stock a variety of traditional silicone bronze and copper fastenings used for boat building, home repairs or renovations.

Square Copper Boat Nails
Sold per 1 kg.
Copper Roves
Sold per 1 kg.

Silicon Bronze Boat Nails
Sold per 1 kg.

Silicone Bronze Wood Screws
Silicon bronze cut thread slot head countersunk woodscrews for boat building. Priced individually and sold individually. Please choose size and enter quantity at checkout.
Silicone Bronze UNC Hex Finished Nuts
Silicon bronze UNC hex finished nuts. Priced individually and sold individually. Please choose size and enter quantity at checkout.
Silicone Bronze UNC Square Nuts
Silicon bronze UNC square nuts. Priced individually and sold individually. Please choose size and enter quantity at checkout.

Silicone Bronze Washers
Silicon bronze washers. Priced individually and sold individually. Please choose size and enter quantity at checkout.

Carriage Bolts
Priced individually and sold individually. Please choose size and enter quantity at checkout.
Wooden Sailing Blocks
Traditional, hand-made blocks incorporating high-performance roll bearing sheaves.




Single Rope Strop Block
X-Small
Sheave diameter: 35mm
Rope max size: 6mm
Shell length: 65mm
Small
Sheave diameter: 38mm
Rope max size: 10mm
Shell length: 90mm
Medium
Sheave diameter: 49mm
Rope max size: 12mm
Shell length: 100mm
Large
Sheave diameter: 49mm
Rope max size: 14mm
Shell length: 142mm



Double Rope Strop Block
Small
Sheave diameter: 38mm
Rope max size: 10mm
Shell length: 90mm
Medium Sheave diameter: 49mm
Rope max size: 12mm
Shell length: 100mm
Large
Sheave diameter: 49mm
Rope max size: 14mm
Shell length: 142mm



Single Binding Block
Small
Sheave diameter: 38mm
Rope max size: 10mm
Shell length: 90mm
Medium
heave Diameter: 49mm
Rope Max Size: 12mm
Shell Length: 100mm
Large
Sheave diameter: 49mm
Rope max size: 14mm
Shell length: 142mm



Single Binding Block with Becket
Small
Sheave Diameter: 38mm
Rope Max Size: 10mm
Shell Length: 90mm
Clevis Diameter: 8mm
Medium
Sheave Diameter: 49mm
Rope Max Size: 12mm
Shell Length: 100mm
Clevis Diameter: 8mm
Large
Sheave Diameter: 49mm
Rope Max Size: 14mm
Shell Length: 142mm
Clevis Diameter: 8mm



Double Binding Block
Small
Sheave Diameter: 38mm
Rope Max Size: 10mm
Shell Length: 90mm
Medium
Sheave Diameter: 49mm
Rope Max Size: 12mm
Shell Length: 100mm
Large
Sheave Diameter: 49mm
Rope Max Size: 14mm
Shell Length: 142mm



Double Binding Block with Becket
Small
Sheave Diameter: 38mm
Rope Max Size: 10mm
Shell Length: 90mm
Clevis Diameter: 8mm
Medium
Sheave Diameter: 49mm
Rope Max Size: 12mm
Shell Length: 100mm
Clevis Diameter: 8mm
Large
Sheave Diameter: 49mm
Rope Max Size: 14mm
Shell Length: 142mm
Clevis Diameter: 8mm



Triple Binding Block
Small
Sheave Diameter: 38mm
Rope Max Size: 10mm
Shell Length: 90mm
Medium
Sheave Diameter: 49mm
Rope Max Size: 12mm
Shell Length: 100mm
Large
Sheave Diameter: 49mm
Rope Max Size: 14mm
Shell Length: 142mm



Triple Binding Block with Becket
Small
Sheave Diameter: 38mm
Rope Max Size: 10mm
Shell Length: 90mm
Clevis Diameter: 8mm
Medium
Sheave Diameter: 49mm
Rope Max Size: 12mm
Shell Length: 100mm
Clevis Diameter: 8mm
Large
Sheave Diameter: 49mm
Rope Max Size: 14mm
Shell Length: 142mm
Clevis Diameter: 8mm
Flags




Australian National Flag
Our flags are hand-sewn with fabric.
General rule for flag size is one yard per 10 foot.



Australian Red Ensign Flag
Our flags are hand-sewn with fabric.
General rule for flag size is one yard per 10 foot. The Red Ensign Australian flag dates back to 1954 and was traditionally used at sea, but can also be used by private citizens. Generally the Australian Red Ensign flag is not to be used on land.


Southern Peninsula Flag
This flag is printed, not hand-sewn.
General rule for flag size is one yard per 10 foot.

CONTACT
61 3 5984 4 333
SALES@WOODENBOATSHOP.COM.AU
129 HOTHAM ROAD, SORRENTO, VICTORIA, AUSTRALIA
61 3 5984 4 333
SALES@WOODENBOATSHOP.COM.AU
129 HOTHAM ROAD, SORRENTO, VICTORIA, AUSTRALIA
CONTACT
61 3 5984 4 333
SALES@WOODENBOATSHOP.COM.AU
129 HOTHAM ROAD, SORRENTO, VICTORIA, AUSTRALIA
61 3 5984 4 333
SALES@WOODENBOATSHOP.COM.AU
129 HOTHAM ROAD, SORRENTO, VICTORIA, AUSTRALIA